1. CLOSED MOTOR ASSEMBLY. Motor connected directly to pump. Space-saver and cost-effective. |
Motor Power Range |
90W (0.12HP) to 15kW (20HP) |
Max Total Head |
50Hz |
85m (278 ft) |
60Hz |
120m (393 ft) |
Temperature Range |
- 80 degC ( -110 degF ) to 280 degC ( 840 degF ) | |
MAGPAC series |
META series |
|
|
|
|
|
|
|
|
|
| | |
2. OPEN COUPLED MOTOR ASSEMBLY Motor connected through coupling. For versatile application with broad-band performance. |
Motor Power Range |
3.7 kW (5.0 HP) to 130kW (175HP) |
Max Total Head |
50Hz |
90m (295 ft) |
60Hz |
130m (425 ft) |
Temperature Range |
- 80 deg C ( -110 deg F ) to 450 deg C ( 840 deg F ) | |
| |
3. SPECIAL TURBINE VANE (REGENERATIVE) design. Turbine-Vane lmpeller design realizes HIGH HEAD @ LOW CAPACITY performance with compact design. |
Motor Power Range |
0.75kW (1.0HP) to 3.7kW (5.0HP) |
Max Total Head |
50Hz |
65m (213 ft) |
60Hz |
90m (295 ft) |
Temperature Range |
- 30 deg C ( -22 deg F ) to +150 deg C ( 300 deg F ) | |
| |
4. Special HIGH TEMPERATURE(RESISTANT)design. Models are lined-up for high-temperature service. |
Temperature Range |
Choice of Max + 280 deg C ( +535 deg F ) & Max +450 deg C ( 840 deg F ) | |
MAGPAC series |
MAXP series |
|
|
|
|
|
|
|
|
|
| | |
5. ANSI standard. Number of models are available in ANSI B73.1 standard, which enables ANSI retrofit. |
Motor Power Range |
3.7 kW (5.0HP) to 130 kW (175HP) |
Max Total Head |
50Hz |
90m (295 ft) |
60Hz |
130m (425 ft) |
Temperature Range |
- 80 deg C ( -110 deg F ) to 450 deg C ( 840 deg F ) | |
MAXP series |
MAGPAC series |
|
|
|
|
|
|
|
|
| | |
6. ISO standard. Number of models are available in ISO2858 standard, which enables ISO retrofit. |
Motor Power Range |
5.5 kW (7.5HP) to 55 kW (75HP) |
Max Total Head |
50Hz |
90m (295 ft) |
60Hz |
130m (426 ft) |
Temperature Range |
- 80 degC ( -110 degF ) to 150 degC ( 300 degF ) | |
| |
7. VERTICAL configuration. Number of vertically configured models are also available from SUBMERGEABLE to IN-LINE applications. |
|
Excerpt Models Only ( Not showing all model available ) | |
| |
8. Special HIGH PRESSURE DESIGN PRESSURE Custom-made high-pressure casing makes endureable at extremely high-pressure process (Please note these are NOT for high-head.). |
|
Only showing representative models. |
Design Pressure Range |
| |
| |
9. JACKET CASING models Customary-made models are available with special peripherals such as jacketing (full/half), casing center-support, etc. |
Temperature Range |
- 80 deg C ( -110 deg F ) to 450 deg C ( 840 deg F ) | |
MAGPAC series |
MAXP series |
|
|
|
|
|
| | |